Go back
Hossain Ahmed

Hossain Ahmed

Assistant Professor

Engineering Technology


  • Ph.D. in Mechanical & Energy Engineering from University of North Texas

  • M.S. in Mechanical Engineering from Lamar University

  • B.S. in Mechanical Engineering from Chittagong University of Engineering & Technology (CUET)

Dr. Ahmed joined the Department of Engineering Technology team at Austin Peay State University (APSU) as an Assistant Professor in Fall 2023. He has worked in an industrial setting for around seven years in a power generation business. In addition, Dr. Ahmed has about six years of teaching assistant/teaching fellow experience in different courses in the mechanical engineering department at UNT. 

His primary research interests cover the corrosion of micro-channel heat exchangers, computational fluid dynamics (CFD), and structural health monitoring of engineering structures.

  1. Ahmed, H., Sadat, H., & Nasrazadani, S. (2023). High-Fidelity Conjugate Heat Transfer Simulation of Micro-Channel Heat Exchanger. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 106(1), 165–181. https://doi.org/10.37934/arfmts.106.1.165181 

  2. Ahmed, H., Nasrazadani, S. & Sadat. H. (2023). Comparison of Thermal Effectiveness and Crevice Corrosion Risk of Fin Geometry on All-Aluminum Microchannel Heat Exchangers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105(2), 192–203. https://doi.org/10.37934/arfmts.105.2.192203

  3. Ahmed H., Nasrazadani S., & Ju S., (2021). Review Paper on Harsh Environmental Structural Health Monitoring. International Journal of Scientific Research & Engineering Trends, 7 (4). 2304-2314.

  4. Manzo M., Ahmed H., & Nasrazadani S. (2020). Study on emission spectral lines of hematite and magnetite for purity’s differentiation. AIP Advances, 10(10), 105327.

  5. Zhou J., Ahmed H., Yao CW, and Aung K., “Study of Dynamic Response of Grass-like Crops Using High-Speed Digital Image,” 2016 ASME International Mechanical Engineering Congress and Exposition (IMECE), November 11-17, 2016, Phoenix, Arizona

  6. Chowdhury S.R., Hossain A.M., Ahmed J., Ahmed H., Noor N., “Experimental analysis of mechanical properties of different types of brass alloy,” ICMERE2019-PI-244; 5th International Conference on Mechanical Engineering and Renewable Energy, 11-13 December 2019, CUET.